Wasp-barcode WLS9600 Product Reference Guide Manual do Utilizador

WLS96001D Laser Scanner USB Product Reference Guide

Contents8WLS9600NOTES

ISSN ENTER/EXIT PROGRAMMING MODE90WLS9600ISSNThe following options apply to the ISSN symbology.ISSN Enable/DisableEnables/disables conversion of EAN/J

ENTER/EXIT PROGRAMMING MODE EAN 8 Enable/DisableProduct Reference Guide 91EAN 8 (JAN 8)The following options apply to the E

EAN 8 (Jan 8) ENTER/EXIT PROGRAMMING MODE92WLS9600Expand EAN 8 to EAN 13Enable this option to expand EAN 8/JAN 8 labels to EAN 13/JAN 13.DEFAULTExpand

ENTER/EXIT PROGRAMMING MODE UPC/EAN Decoding LevelProduct Reference Guide 93UPC/EAN GLOBAL SETTINGSThis section provides co

UPC/EAN Global Settings ENTER/EXIT PROGRAMMING MODE94WLS9600UPC/EAN CorrelationWhen correlation is enabled, the reader will combine label data from mu

ENTER/EXIT PROGRAMMING MODE In-Store Minimum ReadsProduct Reference Guide 95In-Store Minimum ReadsThis feature specifies th

Add-Ons ENTER/EXIT PROGRAMMING MODE96WLS9600ADD-ONSContact Customer Support for advanced programming of optional and conditional add-ons.Optional Add-

ENTER/EXIT PROGRAMMING MODE Optional Add-On TimerProduct Reference Guide 97Optional Add-On TimerThis option sets the time t

Optional Add-on Timer = 60msOptional Add-on Timer = 70msDEFAULTOptional Add-on Timer = 100msOptional Add-on Timer = 120msOptional Add-on Timer = 140ms

Optional Add-on Timer = 180msOptional Add-on Timer = 200msOptional Add-on Timer = 220msOptional Add-on Timer =

Product Reference Guide 1Chapter 1IntroductionAbout this ManualThis Product Reference Guide (PRG) is provided for users seeking advanced technical inf

Add-Ons ENTER/EXIT PROGRAMMING MODE100WLS9600Optional GS1-128 Add-On TimerThis option sets the timer expiration value to read the added part after rea

Optional GS1-128 Add-On Timer = 60msOptional GS1-128 Add-On Timer = 70msOptional GS1-128 Add-On Timer = 100msOptional GS1-128 Add-On Timer = 120msOpti

Optional GS1-128 Add-On Timer = 180msOptional GS1-128 Add-On Timer = 200msOptional GS1-128 Add-On Timer = 220msOptional GS1-128 Add-On Timer = 240msOp

ENTER/EXIT PROGRAMMING MODE P2 Add-Ons Minimum ReadsProduct Reference Guide 103P2 Add-Ons Minimum ReadsThis feature specifi

Add-Ons ENTER/EXIT PROGRAMMING MODE104WLS9600P5 Add-Ons Minimum ReadsThis feature specifies the minimum number of times a P5 add-on must be read befor

ENTER/EXIT PROGRAMMING MODE GS1-128 Add-Ons Minimum ReadsProduct Reference Guide 105GS1-128 Add-Ons Minimum ReadsThis featu

Code 39 ENTER/EXIT PROGRAMMING MODE106WLS9600CODE 39The following options apply to the Code 39 symbology.Code 39 Enable/DisableCode 39 = DisableCode 3

ENTER/EXIT PROGRAMMING MODE Code 39 Check Character TransmissionProduct Reference Guide 107Code 39 Check Character Transmis

Code 39 ENTER/EXIT PROGRAMMING MODE108WLS9600Code 39 Start/Stop Character TransmissionEnable this option to enable/disable transmission of Code 39 sta

ENTER/EXIT PROGRAMMING MODE Code 39 Quiet ZonesProduct Reference Guide 109Code 39 Quiet ZonesThis feature specifies the num

Introduction2WLS9600Manual ConventionsThe following conventions are used in this document:The symbols listed below are used in this manual to notify t

Code 39 ENTER/EXIT PROGRAMMING MODE110WLS9600Code 39 Minimum ReadsThis feature specifies the minimum number of consecutive times a Code 39 label must

ENTER/EXIT PROGRAMMING MODE Code 39 Decoding LevelProduct Reference Guide 111Code 39 Decoding LevelDecoding Levels are used

Code 39 ENTER/EXIT PROGRAMMING MODE112WLS9600Code 39 Length ControlThis feature specifies either variable length decoding or fixed length decoding for

ENTER/EXIT PROGRAMMING MODE Code 39 Set Length 1Product Reference Guide 113Code 39 Set Length 1This feature specifies one o

Code 39 ENTER/EXIT PROGRAMMING MODE114WLS9600Code 39 Set Length 2This feature specifies one of the barcode lengths for Code 39 Length Control. Length

ENTER/EXIT PROGRAMMING MODE Code 39 Interdigit RatioProduct Reference Guide 115Code 39 Interdigit RatioThis feature specifi

Code 39 ENTER/EXIT PROGRAMMING MODE116WLS9600Code 39 Interdigit Ratio (continued)Code 39 Interdigit Ratio = 6Code 39 Interdigit Ratio = 7Code 39 Inter

ENTER/EXIT PROGRAMMING MODE Code 39 Character CorrelationProduct Reference Guide 117Code 39 Character CorrelationWhen corre

Code 32 (ITAL Pharmaceutical Code) ENTER/EXIT PROGRAMMING MODE118WLS9600CODE 32 (ITAL PHARMACEUTICAL CODE)The following options apply to the Code 32 (

ENTER/EXIT PROGRAMMING MODE Code 32 Check Char TransmissionProduct Reference Guide 119Code 32 Check Char TransmissionEnable

About the ReaderProduct Reference Guide 3About the ReaderTypically, units are factory-programmed for the most common termin

Code 39 CIP (French Pharmaceutical) ENTER/EXIT PROGRAMMING MODE120WLS9600CODE 39 CIP (FRENCH PHARMACEUTICAL)The following options apply to the Code 39

ENTER/EXIT PROGRAMMING MODE Code 128 Enable/DisableProduct Reference Guide 121CODE 128The following options apply to the Co

Code 128 ENTER/EXIT PROGRAMMING MODE122WLS9600Code 128 Check Character TransmissionEnable this option to transmit the check character along with Code

ENTER/EXIT PROGRAMMING MODE Code 128 Sub-Code Change TransmissionProduct Reference Guide 123Code 128 Sub-Code Change Transm

Code 128 ENTER/EXIT PROGRAMMING MODE124WLS9600Code 128 Quiet ZonesThis feature specifies the number of quiet zones for Code 128 labels. Quiet zones ar

ENTER/EXIT PROGRAMMING MODE Code 128 Minimum ReadsProduct Reference Guide 125Code 128 Minimum ReadsThis feature specifies t

Code 128 ENTER/EXIT PROGRAMMING MODE126WLS9600Code 128 Decoding LevelDecoding Levels are used to configure a barcode symbology decoder to be very aggr

ENTER/EXIT PROGRAMMING MODE Code 128 Length ControlProduct Reference Guide 127Code 128 Length ControlThis feature specifies

Code 128 ENTER/EXIT PROGRAMMING MODE128WLS9600Code 128 Set Length 1Specifies one of the barcode lengths for Code 128 Length Control. Length 1 is the m

ENTER/EXIT PROGRAMMING MODE Code 128 Set Length 2Product Reference Guide 129Code 128 Set Length 2This feature specifies one

Introduction4WLS9600NOTES

Code 128 ENTER/EXIT PROGRAMMING MODE130WLS9600Code 128 Character CorrelationWhen correlation is enabled, the barcode reader will combine label data fr

ENTER/EXIT PROGRAMMING MODE GS1-128 EnableProduct Reference Guide 131GS1-128The following options apply to the GS1-128 symb

Code ISBT 128 ENTER/EXIT PROGRAMMING MODE132WLS9600CODE ISBT 128The following options apply to the ISBT 128 symbology.ISBT 128 ConcatenationUse this o

ENTER/EXIT PROGRAMMING MODE ISBT 128 Concatenation ModeProduct Reference Guide 133ISBT 128 Concatenation ModeSpecifies the

Code ISBT 128 ENTER/EXIT PROGRAMMING MODE134WLS9600ISBT 128 Dynamic Concatenation TimeoutSpecifies the timeout used by the ISBT 128 Dynamic Concatenat

ENTER/EXIT PROGRAMMING MODE Codablock F Enable/DisableProduct Reference Guide 135CODABLOCK FThe following options apply to

Codablock F ENTER/EXIT PROGRAMMING MODE136WLS9600Codablock F AIM CheckSpecifies if Check Digit calculation algorithm is AIM compliant or not. Codabloc

ENTER/EXIT PROGRAMMING MODE Codablock F Set Length 1Product Reference Guide 137Codablock F Set Length 1Specifies one of the

Codablock F ENTER/EXIT PROGRAMMING MODE138WLS9600Codablock F Set Length 2This feature specifies one of the barcode lengths for Codablock F Length Cont

ENTER/EXIT PROGRAMMING MODE I 2 of 5 Enable/DisableProduct Reference Guide 139INTERLEAVED 2 OF 5 (I 2 OF 5)The following op

Product Reference Guide5Chapter 2SetupUnpackingCheck carefully to ensure the reader and any accessories ordered are present and undamaged. If any dama

Interleaved 2 of 5 (I 2 of 5) ENTER/EXIT PROGRAMMING MODE140WLS9600I 2 of 5 Check Character TransmissionEnable this option to transmit the check chara

ENTER/EXIT PROGRAMMING MODE I 2 of 5 Minimum ReadsProduct Reference Guide 141I 2 of 5 Minimum ReadsThis feature specifies t

Interleaved 2 of 5 (I 2 of 5) ENTER/EXIT PROGRAMMING MODE142WLS96002 of 5 Decoding LevelThis configuration item applies to Interleaved 2 of 5, China P

ENTER/EXIT PROGRAMMING MODE I 2 of 5 Length ControlProduct Reference Guide 143I 2 of 5 Length ControlThis feature specifies

Interleaved 2 of 5 (I 2 of 5) ENTER/EXIT PROGRAMMING MODE144WLS9600I 2 of 5 Set Length 1This feature specifies one of the barcode lengths for I 2 of 5

ENTER/EXIT PROGRAMMING MODE I 2 of 5 Set Length 2Product Reference Guide 145I 2 of 5 Set Length 2This feature specifies one

Interleaved 2 of 5 (I 2 of 5) ENTER/EXIT PROGRAMMING MODE146WLS9600I 2 of 5 Character CorrelationWhen correlation is enabled, the barcode reader will

ENTER/EXIT PROGRAMMING MODE Follett 2 of 5 Enable/DisableProduct Reference Guide 147FOLLETT 2 OF 5The following options app

Standard 2 of 5 ENTER/EXIT PROGRAMMING MODE148WLS9600STANDARD 2 OF 5The following options apply to the Standard 2 of 5 symbology.Standard 2 of 5 Enabl

ENTER/EXIT PROGRAMMING MODE Standard 2 of 5 Check Character TransmissionProduct Reference Guide 149Standard 2 of 5 Check Ch

Setup6WLS9600Installing the Interface CableFor Corded versions, connect the reader cable by inserting the cable into the handle as shown in Figure 1.

Standard 2 of 5 ENTER/EXIT PROGRAMMING MODE150WLS9600Standard 2 of 5 Decoding LevelThe Standard 2 of 5 Decoding Level feature is set using "2 of

ENTER/EXIT PROGRAMMING MODE Standard 2 of 5 Set Length 1Product Reference Guide 151Standard 2 of 5 Set Length 1This feature

Standard 2 of 5 ENTER/EXIT PROGRAMMING MODE152WLS9600Standard 2 of 5 Set Length 2This feature specifies one of the barcode lengths for Standard 2 of 5

ENTER/EXIT PROGRAMMING MODE Standard 2 of 5 Character CorrelationProduct Reference Guide 153Standard 2 of 5 Character Corre

Industrial 2 of 5 ENTER/EXIT PROGRAMMING MODE154WLS9600INDUSTRIAL 2 OF 5The following options apply to the Industrial 2 of 5 symbology.Industrial 2 of

ENTER/EXIT PROGRAMMING MODE Industrial 2 of 5 Check Character TransmissionProduct Reference Guide 155Industrial 2 of 5 Chec

Industrial 2 of 5 ENTER/EXIT PROGRAMMING MODE156WLS9600Industrial 2 of 5 Set Length 1This feature specifies one of the barcode lengths for Industrial

ENTER/EXIT PROGRAMMING MODE Industrial 2 of 5 Set Length 2Product Reference Guide 157Industrial 2 of 5 Set Length 2This fea

Industrial 2 of 5 ENTER/EXIT PROGRAMMING MODE158WLS9600Industrial 2 of 5 Minimum ReadsThis feature specifies the minimum number of consecutive times a

ENTER/EXIT PROGRAMMING MODE Industrial 2 of 5 Character CorrelationProduct Reference Guide 159Industrial 2 of 5 Character C

Installing the Interface CableProduct Reference Guide 7Keyboard Wedge ConnectionThe Keyboard Wedge cable has a ‘Y’ connecti

Code IATA ENTER/EXIT PROGRAMMING MODE160WLS9600CODE IATAThe following options apply to the IATA symbology.IATA Enable/DisableEnables/Disables the abil

ENTER/EXIT PROGRAMMING MODE China Postal Code Enable/DisableProduct Reference Guide 161CHINA POSTAL CODEThe following optio

China Postal Code ENTER/EXIT PROGRAMMING MODE162WLS9600China Postal Code Minimum ReadsThis feature specifies the minimum number of consecutive times a

ENTER/EXIT PROGRAMMING MODE China Postal Code Length ControlProduct Reference Guide 163China Postal Code Length ControlThis

China Postal Code ENTER/EXIT PROGRAMMING MODE164WLS9600China Postal Code Set Length 1This feature specifies one of the barcode lengths for China Posta

ENTER/EXIT PROGRAMMING MODE China Postal Code Set Length 2Product Reference Guide 165China Postal Code Set Length 2This fea

China Postal Code ENTER/EXIT PROGRAMMING MODE166WLS9600China Postal Code Character CorrelationWhen correlation is enabled, the barcode reader will com

ENTER/EXIT PROGRAMMING MODE Codabar Enable/DisableProduct Reference Guide 167CODABARThe following options apply to the Coda

Codabar ENTER/EXIT PROGRAMMING MODE168WLS9600Codabar Check Character TransmissionEnable this option to transmit the check character along with Codabar

ENTER/EXIT PROGRAMMING MODE Codabar Start/Stop Character SetProduct Reference Guide 169Codabar Start/Stop Character SetThis

Setup8WLS9600Figure 5. Other Interface ConnectionsIBM Keyboard Wedge or...Specific cables are required for connection to different hosts. The connec-t

Codabar ENTER/EXIT PROGRAMMING MODE170WLS9600Codabar Quiet ZonesSpecifies the number of quiet zones for Codabar labels. Quiet zones are blank areas at

ENTER/EXIT PROGRAMMING MODE Codabar Minimum ReadsProduct Reference Guide 171Codabar Minimum ReadsThis feature specifies the

Codabar ENTER/EXIT PROGRAMMING MODE172WLS9600Codabar Decoding LevelDecoding Levels are used to configure a barcode symbology decoder to be very aggres

ENTER/EXIT PROGRAMMING MODE Codabar Length ControlProduct Reference Guide 173Codabar Length ControlThis feature specifies e

Codabar ENTER/EXIT PROGRAMMING MODE174WLS9600Codabar Set Length 1This feature specifies one of the barcode lengths for Codabar Length Control. Length

ENTER/EXIT PROGRAMMING MODE Codabar Set Length 2Product Reference Guide 175Codabar Set Length 2This feature specifies one o

Codabar ENTER/EXIT PROGRAMMING MODE176WLS9600Codabar Interdigit RatioThis feature specifies the ratio between an intercharacter space and module for C

ENTER/EXIT PROGRAMMING MODE Codabar Interdigit RatioProduct Reference Guide 177Codabar Interdigit Ratio (continued)Codabar

Codabar ENTER/EXIT PROGRAMMING MODE178WLS9600Codabar Character CorrelationWhen correlation is enabled, the barcode reader will combine label data from

ENTER/EXIT PROGRAMMING MODE ABC Codabar Enable/DisableProduct Reference Guide 179ABC CODABARThe following options apply to

Interface SelectionProduct Reference Guide 9Table 1. Available InterfacesRS-232FEATURESRS-232 standard interfaceSelect RS23

ABC Codabar ENTER/EXIT PROGRAMMING MODE180WLS9600ABC Codabar Dynamic Concatenation TimeoutSpecifies the timeout in 10-millisecond ticks used by the AB

ENTER/EXIT PROGRAMMING MODE ABC Codabar Force ConcatenationProduct Reference Guide 181ABC Codabar Force ConcatenationForces

Code 11 ENTER/EXIT PROGRAMMING MODE182WLS9600CODE 11The following options apply to the Code 11 symbology.Code 11 Enable/DisableWhen disabled, the read

ENTER/EXIT PROGRAMMING MODE Code 11 Check Character TransmissionProduct Reference Guide 183Code 11 Check Character Transmis

Code 11 ENTER/EXIT PROGRAMMING MODE184WLS9600Code 11 Length ControlThis feature specifies either variable length decoding or fixed length decoding for

ENTER/EXIT PROGRAMMING MODE Code 11 Set Length 1Product Reference Guide 185Code 11 Set Length 1This feature specifies one o

Code 11 ENTER/EXIT PROGRAMMING MODE186WLS9600Code 11 Set Length 2This feature specifies one of the barcode lengths for Code 11 Length Control. Length

ENTER/EXIT PROGRAMMING MODE Code 11 Interdigit RatioProduct Reference Guide 187Code 11 Interdigit RatioThis feature specifi

Code 11 ENTER/EXIT PROGRAMMING MODE188WLS9600Code 11 Interdigit Ratio (continued)Code 11 Interdigit Ratio = 6Code 11 Interdigit Ratio = 7Code 11 Inter

ENTER/EXIT PROGRAMMING MODE Code 11 Decoding LevelProduct Reference Guide 189Code 11 Decoding LevelDecoding Levels are used

Wasp Barcode Technologies1400 10th StreetPlano, Texas USA 75074Tel. 214-547-4100Tel. 214-547-4101©2000-2014 Wasp Barcode Technologies, Inc. (an unpub

KEYBOARDFEATURESAT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95 w/Standard Key EncodingSelect KBD-ATSet KEYBOARDWEDGEInterfaceFeaturesstarti

Code 11 ENTER/EXIT PROGRAMMING MODE190WLS9600Code 11 Character CorrelationWhen correlation is enabled, the barcode reader will combine label data from

ENTER/EXIT PROGRAMMING MODE GS1 DataBar™ Omnidirectional Enable/DisableProduct Reference Guide 191GS1 DATABAR™ OMNIDIRECTIO

GS1 DataBar™ Omnidirectional ENTER/EXIT PROGRAMMING MODE192WLS9600GS1 DataBar™ Omnidirectional Minimum ReadsThis feature specifies the minimum number

ENTER/EXIT PROGRAMMING MODE GS1 DataBar™ Expanded Enable/DisableProduct Reference Guide 193GS1 DATABAR™ EXPANDEDThe followi

GS1 DataBar™ Expanded ENTER/EXIT PROGRAMMING MODE194WLS9600GS1 DataBar™ Expanded Minimum ReadsThis feature specifies the minimum number of consecutive

ENTER/EXIT PROGRAMMING MODE GS1 DataBar™ Expanded Set Length 1Product Reference Guide 195GS1 DataBar™ Expanded Set Length 1

GS1 DataBar™ Expanded ENTER/EXIT PROGRAMMING MODE196WLS9600GS1 DataBar™ Expanded Set Length 2This feature specifies one of the barcode lengths for GS1

ENTER/EXIT PROGRAMMING MODE GS1 DataBar™ Limited Enable/DisableProduct Reference Guide 197GS1 DATABAR™ LIMITEDThe following

GS1 DataBar™ Limited ENTER/EXIT PROGRAMMING MODE198WLS9600GS1 DataBar™ Limited Minimum ReadsThis feature specifies the minimum number of consecutive t

ENTER/EXIT PROGRAMMING MODE Code 93 Enable/DisableProduct Reference Guide 199CODE 93The following options apply to the Code

KEYBOARD (continued)FEATURESKeyboard Wedge for IBM Terminals 31xx, 32xx, 34xx, 37xx make only keyboardSelect KBD-IBM-MSet KEYBOARDWEDGEInterfaceFeatur

Code 93 ENTER/EXIT PROGRAMMING MODE200WLS9600Code 93 Check Character TransmissionEnables/disables transmission of an optional Code 93 check character.

ENTER/EXIT PROGRAMMING MODE Code 93 Set Length 1Product Reference Guide 201Code 93 Set Length 1Specifies one of the barcode

Code 93 ENTER/EXIT PROGRAMMING MODE202WLS9600Code 93 Set Length 2This feature specifies one of the barcode lengths for Code 93 Length Control. Length

ENTER/EXIT PROGRAMMING MODE Code 93 Minimum ReadsProduct Reference Guide 203Code 93 Minimum ReadsThis feature specifies the

Code 93 ENTER/EXIT PROGRAMMING MODE204WLS9600Code 93 Decoding LevelSpecifies the decoding level for Code 93. Decoding Levels are used to configure a b

ENTER/EXIT PROGRAMMING MODE Code 93 Quiet ZonesProduct Reference Guide 205Code 93 Quiet ZonesEnables/disables quiet zones f

Code 93 ENTER/EXIT PROGRAMMING MODE206WLS9600Code 93 StitchingDisable/enable fixed or variable length stitching for Code 93. Code 93 Stitching = Disab

ENTER/EXIT PROGRAMMING MODE MSI Enable/DisableProduct Reference Guide 207MSIThe following options apply to the MSI symbolog

MSI ENTER/EXIT PROGRAMMING MODE208WLS9600MSI Check Character TransmissionEnables/disables transmission of an MSI check character. MSI Check Character

ENTER/EXIT PROGRAMMING MODE MSI Set Length 1Product Reference Guide 209MSI Set Length 1This feature specifies one of the ba

Setup12WLS9600Customizing Configuration Settings Configure Interface SettingsIf after scanning the interface barcode from the previous table, your ins

MSI ENTER/EXIT PROGRAMMING MODE210WLS9600MSI Set Length 2This feature specifies one of the barcode lengths for MSI Length Control. Length 2 is the max

ENTER/EXIT PROGRAMMING MODE MSI Minimum ReadsProduct Reference Guide 211MSI Minimum ReadsThis feature specifies the minimum

MSI ENTER/EXIT PROGRAMMING MODE212WLS9600MSI Decoding LevelSpecifies the decoding level for MSI. Decoding Levels are used to configure a barcode symbo

ENTER/EXIT PROGRAMMING MODE Plessey Enable/DisableProduct Reference Guide 213PLESSEYThe following options apply to the Ples

Plessey ENTER/EXIT PROGRAMMING MODE214WLS9600Plessey Check Character CalculationEnables/Disables calculation and verification of an optional Plessey c

ENTER/EXIT PROGRAMMING MODE Plessey Length ControlProduct Reference Guide 215Plessey Length ControlThis feature specifies e

Plessey ENTER/EXIT PROGRAMMING MODE216WLS9600Plessey Set Length 1This feature specifies one of the barcode lengths for Plessey Length Control. Length

ENTER/EXIT PROGRAMMING MODE Plessey Set Length 2Product Reference Guide 217Plessey Set Length 2This feature specifies one o

Plessey ENTER/EXIT PROGRAMMING MODE218WLS9600Plessey Minimum ReadsThis feature specifies the minimum number of consecutive times a Plessey label must

ENTER/EXIT PROGRAMMING MODE Plessey Decoding LevelProduct Reference Guide 219Plessey Decoding LevelSpecifies the decoding l

Customizing Configuration SettingsProduct Reference Guide 13Resetting the Product Configuration to DefaultsRestore Custom D

Plessey ENTER/EXIT PROGRAMMING MODE220WLS9600Plessey StitchingEnables/disables fixed length stitching for Plessey.DEFAULT Plessey Stitching = Disable

ENTER/EXIT PROGRAMMING MODE Code 4 Enable/DisableProduct Reference Guide 221CODE 4The following options apply to the Code 4

Code 5 ENTER/EXIT PROGRAMMING MODE222WLS9600Code 4 Hex to Decimal ConversionThis feature enables/disables the conversion of hexidecimal label data to

ENTER/EXIT PROGRAMMING MODE Code 5 Check Character TransmissionProduct Reference Guide 223Code 5 Check Character Transmissi

Code 4 and Code 5 Common Configuration Items ENTER/EXIT PROGRAMMING MODE224WLS9600CODE 4 AND CODE 5 COMMON CONFIGURATION ITEMSThe following options ap

ENTER/EXIT PROGRAMMING MODE Code 4 and Code 5 Minimum ReadsProduct Reference Guide 225Code 4 and Code 5 Minimum ReadsThis f

Code 4 and Code 5 Common Configuration Items ENTER/EXIT PROGRAMMING MODE226WLS9600NOTES

Product Reference Guide 227LASER FEATURESLASER SCAN ANGLE on page 228LASER IDLE MODE on page 228BI-DIRECTIONAL READ DECODING on page 229ALWAYS ON SCAN

ENTER/EXIT PROGRAMMING MODE228WLS9600Laser Scan AngleThis feature sets the scan angle for the laser. The Narrow scan angle is helpful for selecting an

ENTER/EXIT PROGRAMMING MODE Bi-Directional Read DecodingProduct Reference Guide 229Bi-Directional Read DecodingThis configu

Setup14WLS9600NOTES

ENTER/EXIT PROGRAMMING MODE230WLS9600Always On Scan Mode TimeoutWhen the WLS9600 is in Always On scanning mode, timeout periods can be configured. If

Product Reference Guide231Chapter 5ReferencesThis section contains explanations and examples of selected barcode features. See the Configuration secti

References232WLS9600• RTS/XON/XOFF — RTS is asserted during transmissions. CTS is ignored. XON and XOFF gate transmissions.• RTS On/CTS — RTS is alway

RS-232 ParametersProduct Reference Guide 233ACK NAK OptionsThis enables/disables the ability of the reader to support the R

References234WLS9600NAK CharacterThis setting specifies an ASCII character or hex value to be used as the NAK character. ASCII characters or any hex v

RS-232 ParametersProduct Reference Guide 235ACK NAK Timeout ValueThis option specifies the amount of time the reader waits

References236WLS9600ACK NAK Retry CountThis feature specifies the number of times the reader retries a label transmission due to a retry condition. Th

RS-232 ParametersProduct Reference Guide 237Disable CharacterSpecifies the value of the RS-232 host command used to disable

References238WLS9600Enable CharacterSpecifies the value of the RS-232 host command used to enable the reader.ASCII characters or any hex value from 0

Keyboard InterfaceProduct Reference Guide 239Keyboard InterfaceWedge Quiet IntervalSpecifies the amount of time the reader

Product Reference Guide 15Chapter 3Configuration Using BarcodesThis and following sections provide programming barcodes to configure your reader by ch

References240WLS9600Intercharacter DelayThis parameter specifies the intercharacter delay between the end of one character and the beginning of the ne

Keyboard InterfaceProduct Reference Guide 241Intercode DelaySpecifies the delay between labels transmitted to the host for

References242WLS9600SymbologiesDecoding LevelDecoding Levels are used to configure a barcode symbology decoder to be very aggressive to very conservat

SymbologiesProduct Reference Guide 243Set Length 2This feature allows you to set one of the barcode lengths for the specifi

References244WLS9600Data Editing When a barcode is scanned, additional information can be sent to the host computer along with the barcode data. This

Data EditingProduct Reference Guide 245Global Prefix/SuffixUp to 20 ASCII characters may be added as a prefix (in a positio

References246WLS9600Global AIM IDThis feature enables/disables addition of AIM IDs for all symbology types.AIM label identifiers (as opposed to custom

Data EditingProduct Reference Guide 247Label IDA Label ID is a customizable code of up to three ASCII characters (each can

Symbology USA Label ID set EU Label ID setASCIIcharacterHexidecimalvalueASCIIcharacterHexidecimalvalueEAN8 FF 464600 A 410000EAN8 P2 FF 464600 J 4A000

Data EditingProduct Reference Guide 249Label ID: Set Individually Per SymbologyTo configure a Label ID individually for a s

16WLS9600Reading Configuration BarcodesYou must first enable your reader to read barcodes in order to use this section. If you have not done this, go

References250WLS9600Table 39STEP ACTION EXAMPLES1. Scan the ENTER/EXIT barcode(Scanner enters Programming Mode)2.Determine placement of the Label ID c

Data EditingProduct Reference Guide 251Character ConversionCharacter conversion is an eight byte configuration item. The ei

References252WLS9600Reading ParametersLabel Gone TimeoutThis feature sets the time after the last label segment is seen before the reader prepares for

Reading ParametersProduct Reference Guide 253Good Read LED DurationThis feature specifies the amount of time that the Good

References254WLS9600Scanning FeaturesScan ModeThis mode is associated with typical handheld reader operation. Selects the scan operating mode for the

Scanning FeaturesProduct Reference Guide 255Scanning Active TimeThis setting specifies the amount of time that the reader s

References256WLS9600Flash On TimeThis feature specifies the ON time for the indicator LED while in Flash Mode. The selectable range is 100 to 9,900 mi

Scanning FeaturesProduct Reference Guide 257Flash Off TimeThis feature specifies the OFF time for the indicator LED while i

References258WLS9600NOTES

Product Reference Guide259Appendix ATechnical SpecificationsTable 45 contains Physical and Performance Characteristics, User Environment and Regulator

ENTER/EXIT PROGRAMMING MODE Host Commands — Obey/IgnoreProduct Reference Guide 17GLOBAL INTERFACE FEATURESThe following int

Technical Specifications260WLS9600Decode Capability UPC/EAN/JAN, P2 /P5, ISBN/ISSN; Code 39, Code39 FullASCII; Italian Pharmacode 39, Code39 CIP; Code

Technical SpecificationsProduct Reference Guide 261Standard Cable PinoutsFigure 10 and Table 46 provide standard pinout inf

Technical Specifications262WLS9600LED and Beeper IndicationsThe reader’s beeper sounds and its LED illuminates to indicate various functions or errors

Technical SpecificationsProduct Reference Guide 263Table 48Programming Mode - The following indications ONLY occur when the

Technical Specifications264WLS9600NOTES

Product Reference Guide265Appendix BStandard DefaultsThe most common configuration settings are listed in the “Default” column of the table below. Pag

Standard Defaults266WLS9600KEYBOARD WEDGECountry ModeU.S. Keyboard 34Caps Lock StateCaps Lock OFF 37NumlockNumlock Key Unchanged 38Send Control Charac

Standard DefaultsProduct Reference Guide 267READING PARAMETERSDouble Read Timeout0.6 Second 65Label Gone Timeout160 ms 67Po

Standard Defaults268WLS9600GTINGTIN FormattingDisable 86EAN 13 (Jan 13)EAN 13 Enable/DisableEnable 87EAN 13 Check Character TransmissionSend 87EAN-13

Standard DefaultsProduct Reference Guide 269Code 39 Full ASCIIDisable 108Code 39 Quiet ZonesAuto 109Code 39 Minimum Reads2

Global Interface Features ENTER/EXIT PROGRAMMING MODE18WLS9600NOTES

Standard Defaults270WLS9600GS1-128GS1-128 EnableTransmit in GS1-128 data format131ISBT 128ISBT 128 ConcatenationDisable 132ISBT 128 Force Concatenati

Standard DefaultsProduct Reference Guide 271Standard 2 of 5 Check Character TransmissionSend 149Standard 2 of 5 Minimum Rea

Standard Defaults272WLS9600Codabar Enable/DisableDisable 167Codabar Check Character CalculationDon’t Calculate 167Codabar Check Character Transmission

Standard DefaultsProduct Reference Guide 273GS1 DataBar™ OmnidirectionalGS1 DataBar™ Omnidirectional Enable/DisableDisable

Standard Defaults274WLS9600MSI Set Length 11 209MSI Set Length 250 210MSI Minimum Reads4 211MSI Decoding Level3 212PlesseyPlessey Enable/DisableDisabl

Product Reference Guide275Appendix CSample BarcodesThe sample barcodes in this appendix are typical representations for their symbology types.1D Barco

Sample Barcodes276WLS9600Sample Barcodes (continued) Code 32Codabar13579 Code 93 Code 11123456789

Sample BarcodesProduct Reference Guide 277GS1 DataBar™ (RSS)GS1 DataBar™ Expanded Stacked1029384756019283746501928374602947

Sample Barcodes278WLS9600NOTES

Product Reference Guide279Appendix DKeypadUse the barcodes in this appendix to enter numbers as you would select digits/characters from a keypad.01234

Product Reference Guide 19RS-232 ONLY INTERFACEBAUD RATE on page 20DATA BITS on page 21STOP BITS on page 21PARITY on page 22HANDSHAKING CONTROL on pag

Keypad280WLS96006789HID Variable PIN CodeCancel an incomplete HID Variable PIN Code Exit HID Variable PIN Code

KeypadProduct Reference Guide 281ABCDEF

Keypad282WLS9600NOTES

Product Reference Guide 283Appendix EScancode TablesControl Character EmulationControl character emulation selects from different scancode tables as l

284 WLS9600Interface Type PC AT PS/2, USB-Keyboard or USB-Keyboard for APPLETable 50. Scancode Set When Control Character is 00 or 01 x0 x1 x2 x3 x4

Product Reference Guide 285Interface Type PC AT PS/2, USB-Keyboard or USB-Keyboard for APPLE (continued)Table 51. Scancode Set When Control Character

286 WLS9600Interface type PC AT PS/2 Alt Mode or USB-Keyboard Alt ModeTable 52. Scancode Set When Control Character is 00 or 01 x0 x1 x2 x3 x4 x5 X6

Product Reference Guide 287Interface type PC AT PS/2 Alt Mode or USB-Keyboard Alt Mode (continued)Table 53. Scancode Set When Control Character is 02

288 WLS9600Digital InterfaceTable 54. Scancode Set When Control Character is 00 or 01 X0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF0xNULLC+@SOHC(S

Product Reference Guide 289IBM31xx 102-keyTable 56. Scancode Set When Control Character is 00 or 01 X0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF

Product Reference Guide1Table of ContentsINTRODUCTION ...

ENTER/EXIT PROGRAMMING MODE20WLS9600Baud RateSee page 231 for information on this feature.Baud Rate = 1200Baud Rate = 2400Baud Rate = 4800 Baud Rate =

290 WLS9600IBM XTTable 58. Scancode Set When Control Character is 00 or 01 X0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF0xNULLC+@SOHC(S)+ASTXC(S)

Scancode TablesProduct Reference Guide 291Microsoft Windows Codepage 1252Windows-1252 is a character encoding of the Latin

Scancode Tables292WLS9600NOTES

Product Reference Guide293INDEXBbarcodescancel 279numeric barcodes 279RS-232baud rate 43RS-232 parametersparity 37, 147, 221, 222, 225BeeperPitch,

294WLS9600Ssample barcodescode 128 275code 39 275interleaved 2 of 5 276Scancode Tables 283select digits/characters 279Serial Output 261Signal Sp

ASCII ChartASCII Char.Hex No.ASCII Char.Hex No.ASCII Char.Hex No.ASCII Char.HexNo.NULSOHSTXETXEOTENQACKBELBSHTLFVTFFCRSOSIDLEDC1DC2DC3DC4NAKSYNETBCANE

Wasp Barcode Technologies1400 10th StreetPlano, Texas USA 75074www.waspbarcode.com820050590 (Rev. G) January 2014

ENTER/EXIT PROGRAMMING MODE Data BitsProduct Reference Guide 21Data BitsThis parameter allows the reader to interface with

ENTER/EXIT PROGRAMMING MODE22WLS9600ParityThis feature specifies parity required for sending and receiving data. Select the parity type according to h

ENTER/EXIT PROGRAMMING MODE Handshaking ControlProduct Reference Guide 23Handshaking ControlDEFAULTHandshaking Control = RT

Product Reference Guide 24RS-232/USB-COM INTERFACESINTERCHARACTER DELAY on page 25BEEP ON ASCII BEL on page 25BEEP ON NOT ON FILE on page 26ACK NAK OP

ENTER/EXIT PROGRAMMING MODE Intercharacter DelayProduct Reference Guide 25Intercharacter DelayThis parameter specifies the

ENTER/EXIT PROGRAMMING MODE26WLS9600Beep On Not on FileThis option enables/disables the action of the reader to sound a three beep sequence upon recei

ENTER/EXIT PROGRAMMING MODE ACK NAK OptionsProduct Reference Guide 27ACK NAK OptionsThis enables/disables the ability of th

ENTER/EXIT PROGRAMMING MODE28WLS9600ACK CharacterThis setting specifies an ASCII character or hex value to be used as the ACK character. ASCII charact

ENTER/EXIT PROGRAMMING MODE ACK NAK Timeout ValueProduct Reference Guide 29ACK NAK Timeout ValueThis option specifies the a

Contents2WLS9600Intercharacter Delay ...

ENTER/EXIT PROGRAMMING MODE30WLS9600ACK NAK Error HandlingThis feature specifies the method the reader uses to handle receive errors detected while wa

ENTER/EXIT PROGRAMMING MODE Disable CharacterProduct Reference Guide 31Disable CharacterSpecifies the value of the RS-232 h

ENTER/EXIT PROGRAMMING MODE32WLS9600NOTES

Product Reference Guide 33KEYBOARD INTERFACECOUNTRY MODE on page 34CAPS LOCK STATE on page 37NUMLOCK on page 38SEND CONTROL CHARACTERS on page 39WEDGE

ENTER/EXIT PROGRAMMING MODE34WLS9600Country ModeThis feature specifies the country/language supported by the keyboard.Only the following interfaces su

ENTER/EXIT PROGRAMMING MODE Country ModeProduct Reference Guide 35Country Mode (continued)Country Mode = DenmarkSupports on

ENTER/EXIT PROGRAMMING MODE36WLS9600Country Mode (continued) Country Mode = LithuanianSupports only the in

ENTER/EXIT PROGRAMMING MODE Caps Lock StateProduct Reference Guide 37Country Mode (continued)Country Mode = SwedenCountry M

ENTER/EXIT PROGRAMMING MODE38WLS9600NumlockThis option specifies the setting of the Numbers Lock (Numlock) key while in keyboard wedge interface. This

ENTER/EXIT PROGRAMMING MODE Send Control CharactersProduct Reference Guide 39Send Control CharactersThis feature Specifies

ContentsProduct Reference Guide3EAN 13 Enable/Disable ...

ENTER/EXIT PROGRAMMING MODE40WLS9600Wedge Quiet IntervalThis option specifies the amount of time to look for keyboard activity before the reader break

ENTER/EXIT PROGRAMMING MODE Intercharacter DelayProduct Reference Guide 41Intercharacter DelayThis parameter specifies the

ENTER/EXIT PROGRAMMING MODE42WLS9600Intercode DelaySpecifies the delay between labels transmitted to the host for this interface. The selectable range

ENTER/EXIT PROGRAMMING MODE USB Keyboard SpeedProduct Reference Guide 43USB Keyboard SpeedThis option specifies the USB pol

USB Keyboard Speed = 7ms USB Keyboard Speed = 8ms USB Keyboard Speed = 9ms USB Keyboard Speed = 10msENTER/EXIT PROGRAMMING MODE44WLS9600USB Keyboard S

Product Reference Guide 45USB-OEM INTERFACEUSB-OEM DEVICE USAGE on page 46INTERFACE OPTIONS on page 46Feature settings for USB interfaces differ depen

ENTER/EXIT PROGRAMMING MODE46WLS9600USB-OEM Device UsageThe USB-OEM protocol allows for the reader to be identified as one of two different types of b

Product Reference Guide 47WAND EMULATION INTERFACEWAND SIGNAL SPEED on page 48WAND POLARITY on page 48WAND IDLE STATE on page 49TRANSMIT NOISE on page

ENTER/EXIT PROGRAMMING MODE48WLS9600Wand Signal SpeedThis feature specifies the speed of the Wand output signal per nominal bar or space. Choices are:

ENTER/EXIT PROGRAMMING MODE Wand Idle StateProduct Reference Guide 49Wand Idle StateThis feature specifies the level of the

Contents4WLS9600CODE ISBT 128 ...

ENTER/EXIT PROGRAMMING MODE50WLS9600Label Symbology ConversionWhen this feature is enabled for the Wand Emulation interface, all barcode labels are co

Product Reference Guide 51DATA FORMATGLOBAL PREFIX/SUFFIX on page 52GLOBAL AIM ID on page 53 on page 54LABEL ID starting on page 55• Label ID: Pre-loa

ENTER/EXIT PROGRAMMING MODE52WLS9600Global Prefix/SuffixThis option sets up to 20 characters each from the set of ASCII characters or any hex value fr

ENTER/EXIT PROGRAMMING MODE Global AIM IDProduct Reference Guide 53Global AIM IDThis feature enables/disables addition of A

ENTER/EXIT PROGRAMMING MODE54WLS9600GS1-128 AIM IDIf Global AIM ID is disabled, the AIM ID for GS1-128 can be enabled/disabled independently. The AIM

ENTER/EXIT PROGRAMMING MODE Label IDProduct Reference Guide 55Label IDA Label ID is a customizable code of up to three ASCI

ENTER/EXIT PROGRAMMING MODE56WLS9600Label ID ControlThis option controls whether a Label ID is disabled, or sent as a prefix or suffix for a given sym

ENTER/EXIT PROGRAMMING MODE Label ID Symbology SelectionProduct Reference Guide 57Label ID Symbology SelectionThis option s

ENTER/EXIT PROGRAMMING MODE58WLS9600Label ID Symbology Selection (continued)Set UPC-E/GS1-128 Label ID Character(s)Set EAN 13 Label ID Character(s)Set

ENTER/EXIT PROGRAMMING MODE Label ID Symbology SelectionProduct Reference Guide 59Label ID Symbology Selection (continued)S

ContentsProduct Reference Guide5Codabar Enable/Disable ...

ENTER/EXIT PROGRAMMING MODE60WLS9600Label ID Symbology Selection (continued)Set Code 32 Label ID Character(s)Set Code 39 CIP Label ID Character(s)Set

ENTER/EXIT PROGRAMMING MODE Label ID Symbology SelectionProduct Reference Guide 61Label ID Symbology Selection (continued)S

ENTER/EXIT PROGRAMMING MODE62WLS9600Label ID Symbology Selection (continued)Set Code 11 Label ID Character(s)Set DataBar Omnidirectional Label ID Char

ENTER/EXIT PROGRAMMING MODE Set Global Mid Label ID CharactersProduct Reference Guide 63Label ID Symbology Selection (conti

ENTER/EXIT PROGRAMMING MODE64WLS9600Case ConversionThis feature allows conversion of the case of all alphabetic characters to upper or lower case.DEFA

Product Reference Guide 65READING PARAMETERS DOUBLE READ TIMEOUT on page 66 GOOD READ BEEP VOLUME on page 71LABEL GONE TIMEOUT on page 67 GOOD READ LE

ENTER/EXIT PROGRAMMING MODE66WLS9600Double Read TimeoutDouble Read Timeout prevents a double read of the same label by setting the minimum time allowe

ENTER/EXIT PROGRAMMING MODE Label Gone TimeoutProduct Reference Guide 67Double Read Timeout (continued)Double Read Timeout

LED and Beeper Indicators ENTER/EXIT PROGRAMMING MODE68WLS9600LED AND BEEPER INDICATORSPower On AlertDisables or enables the indication (from the Beep

ENTER/EXIT PROGRAMMING MODE Good Read Beep TypeProduct Reference Guide 69Good Read Beep TypeSpecifies whether the good read

Contents6WLS9600MSI Check Character Transmission ...

LED and Beeper Indicators ENTER/EXIT PROGRAMMING MODE70WLS9600Good Read Beep LengthGood Read Beep Length = 60 msecGood Read Beep Length = 80 msecDEFAU

ENTER/EXIT PROGRAMMING MODE Good Read Beep VolumeProduct Reference Guide 71Good Read Beep VolumeSelects the beeper volume (

LED and Beeper Indicators ENTER/EXIT PROGRAMMING MODE72WLS9600Good Read LED DurationThis feature specifies the amount of time that the Good Read LED r

ENTER/EXIT PROGRAMMING MODE Scan ModeProduct Reference Guide 73SCANNING FEATURESScan ModeSelects the reader’s scan operatin

Scanning Features ENTER/EXIT PROGRAMMING MODE74WLS9600Scanning Active TimeThis setting specifies the amount of time that the reader stays in scan ON s

ENTER/EXIT PROGRAMMING MODE Flash Off TimeProduct Reference Guide 75Flash Off TimeThis feature specifies the OFF time for t

Scanning Features ENTER/EXIT PROGRAMMING MODE76WLS9600NOTES

Product Reference Guide 77CODE SELECTIONThe reader supports the following symbologies (barcode types). Symbology-dependent options for each symbology

Disable All Symbologies78WLS96003. If additional input parameters are needed, go to Appendix D, Keypad, and scan the appro-priate characters from the

ENTER/EXIT PROGRAMMING MODE Coupon ControlProduct Reference Guide 79CODE EAN/UPCCoupon ControlThis feature is used to contr

ContentsProduct Reference Guide7Standard Defaults ...

Code EAN/UPC ENTER/EXIT PROGRAMMING MODE80WLS9600UPC-AThe following options apply to the UPC-A symbology.UPC-A Enable/DisableWhen disabled, the reader

ENTER/EXIT PROGRAMMING MODE Expand UPC-A to EAN-13Product Reference Guide 81Expand UPC-A to EAN-13Expands UPC-A data to the

Code EAN/UPC ENTER/EXIT PROGRAMMING MODE82WLS9600UPC-A Minimum ReadsThis feature specifies the minimum number of consecutive times a UPC-A label must

ENTER/EXIT PROGRAMMING MODE UPC-E Enable/DisableProduct Reference Guide 83UPC-EThe following options apply to the UPC-E sym

UPC-E ENTER/EXIT PROGRAMMING MODE84WLS9600Expand UPC-E to EAN-13Expands UPC-E data to the EAN-13 data format. Selecting this feature also changes the

ENTER/EXIT PROGRAMMING MODE UPC-E Number System Character TransmissionProduct Reference Guide 85UPC-E Number System Charact

GTIN Formatting ENTER/EXIT PROGRAMMING MODE86WLS9600GTIN FORMATTINGThis feature enables/disables the ability to convert UPC-E, UPC-A, EAN 8, and EAN 1

ENTER/EXIT PROGRAMMING MODE EAN 13 Enable/DisableProduct Reference Guide 87EAN 13 (JAN 13)The following options apply to th

EAN 13 (Jan 13) ENTER/EXIT PROGRAMMING MODE88WLS9600EAN-13 Flag 1 CharacterEnables/disables transmission of an EAN/JAN13 Flag1 character. The Flag 1 c

ENTER/EXIT PROGRAMMING MODE EAN 13 Minimum ReadsProduct Reference Guide 89EAN 13 Minimum ReadsThis feature specifies the mi